This was commissioned for a customer who wanted a character feature on a hill looking down over their layout. Designed in 2 pieces to allow for painting of the detailed interior, and with a hollow leg to allow for lighting wires to pass up into the cabin. This is a specialty product with fine details that are delicate and it requires gentle handling. Supplied as a 2 piece unpainted resin print. Currently only available in N scale, but if you’re interested in any other scale, please make contact.
Based on a generic US interlocking tower this little model will add the finishing touches to any yard. Supplied as a one piece unpainted resin print. Please ask for a quote on scales not listed.
A sweet little structure that has the US ranch house feel as well as the NZ railway cottage look. One-piece unpainted resin print.
Please make contact on pricing for scales bigger than 1/120.
Inspired by the signal box at Paekakariki, this little model brings a world of charm to any switching area. One piece unpainted resin print. Please make contact for pricing on scales bigger than 1/120.
This is the first in a range of industrial/plant products that will be sold as separate items but will work together to build up larger industrial infrastructure. Please make contact on pricing for scales bigger than N.
Classic NZ Pub. Unpainted one-piece resin print.
Note: the photogrpahs of the Hilton on the Fern Valley Layout are of a filament (FDM) print, and an earlier version.
A replica of the amazing Cone Hut in the amazing Tararua Ranges. One piece unpainted resin print. Please make contact on pricing for scales bigger than 1/120.
Inspired by the real Nott House between Johnsonville and Tawa, this is a lovely little model that also looks good as a US ranch house. One-piece unpainted resin print. Please make contact for pricing for scales bigger than 1/120.
Image 1: N scale front and back.
Image 2: N scale on the Fern Valley layout.
Image 3: HO scale in my hand.
Image 4: S scale next to N scale
Image 5: HO scale painted
Add some classic kiwi to your layout with this little dairy. One piece unpainted resin print. Note on the signage, I just printed these on standard paper and glued them on. Please make contact on pricing for scales bigger than 1/120.
A slightly worse for wear workshop. Please make contact on pricing for scales bigger than 1/120.
No New Zealand layout should be without a marae. One piece unpainted resin print. Please make contact on pricing for scales bigger than 1/120.
Modelled after a derelict house in Caliente, California, this structure is designed to add a bit of interest to that corner of your layout that might be a bit bare. One-piece unpainted resin print. Please make contact on pricing for scales bigger than N.
All images are of N scale models.
This is a filament (FDM) printed model. It is printed in 5 parts which have been glued together, gap filled and spray painted in primer gray. Available only in N scale at this stage, but if you’re interested in another scale please make contact and we can look into it.
The real Moffat Tunnel East Portal in Colorado has gone through a number of renovations throughout it’s life. This model is from it’s “open windows” phase. If you are looking for a different time frame the files can be altered and another version printed. This would incur and extra charge.
A classic New Zealand villa. One-piece unpainted resin print. Please make contact on pricing for scales bigger than 1/120.
When I started modelling for 3D printing, this structure was always going to be one of the first things I did. I’ve always had a soft spot for this picturesque little shack at the northern end of Greytown. It has, of course, become a favorite with Fern Valley customers too. One piece unpainted resin print. Please ask for a quote on scales not listed.
Based on the historic Golder’s Cottage here in Upper Hutt. One piece unpainted resin print. Both photos are of N scale models. Please make contact on pricing for scales bigger than 1/120.
One-piece unpainted resin print. Please make contact on pricing for scales bigger than 1/120.
Note: images are of the original FDM filament printed structure on the Fern Valley Layout.
Although the original inspiration for this model was the little church in Mangaroa where I got married, it has been blinged up a bit to make it look more churchy. One piece unpainted resin print. Please make contact on pricing for scales bigger than 1/120.
Add some interest to that bare farmland with this classic NZ shearing shed. One-piece unpainted resin print. Please ask for a quote on anything bigger than N scale.